diff --git a/repos/33835d7be3075c023aad/modules b/repos/33835d7be3075c023aad/modules
new file mode 100644
index 0000000..ad49f4f
--- /dev/null
+++ b/repos/33835d7be3075c023aad/modules
@@ -0,0 +1,12 @@
+# /etc/modules: kernel modules to load at boot time.
+#
+# This file contains the names of kernel modules that should be loaded
+# at boot time, one per line. Lines beginning with "#" are ignored.
+# Parameters can be specified after the module name.
+
+snd-bcm2835
+i2c-bcm2708  
+i2c-dev
+fbtft_device name=flexfb gpios=dc:22,reset:27 speed=48000000 
+flexfb width=320 height=240 buswidth=8 init=-1,0xCB,0x39,0x2C,0x00,0x34,0x02,-1,0xCF,0x00,0XC1,0X30,-1,0xE8,0x85,0x00,0x78,-1,0xEA,0x00,0x00,-1,0xED,0x64,0x03,0X12,0X81,-1,0xF7,0x20,-1,0xC0,0x23,-1,0xC1,0x10,-1,0xC5,0x3e,0x28,-1,0xC7,0x86,-1,0x36,0x28,-1,0x3A,0x55,-1,0xB1,0x00,0x18,-1,0xB6,0x08,0x82,0x27,-1,0xF2,0x00,-1,0x26,0x01,-1,0xE0,0x0F,0x31,0x2B,0x0C,0x0E,0x08,0x4E,0xF1,0x37,0x07,0x10,0x03,0x0E,0x09,0x00,-1,0XE1,0x00,0x0E,0x14,0x03,0x11,0x07,0x31,0xC1,0x48,0x08,0x0F,0x0C,0x31,0x36,0x0F,-1,0x11,-2,120,-1,0x29,-1,0x2c,-3
+ads7846_device model=7846 cs=1 gpio_pendown=17  speed=1000000 keep_vref_on=1 swap_xy=0 pressure_max=255 x_plate_ohms=60 x_min=200 x_max=3900 y_min=200 y_max=3900